Textured Crochet Half Circle Rug

Crochet rugs are a great way to add life and freshen up any corner of your home. Crocheted rugs are a beautiful way to decorate the interior of any home. They can be placed anywhere around your house be it for side of a bed, entrance of your home ,Kitchen , living room, bedroom, Backyard or bathroom. 

Making your own crochet is fun and you have the advantage to customize to your liking and need. Crocheted rugs are easier to work up and take less time. Using Bulky yarn or T-shirt yarn is the best choice for making a crochet rug. 

Here is the pattern for Crochet Half Circle Rug. This is a quick and easy crochet rug pattern made up with simple crochet stitches. The finished pattern is beautiful to look at with a simple Crocheted Border. In just a couple of hours you can have a rug you will be proud to decorate your home with.

Materials Used:-

Bulky Yarn

6 mm Crochet Hook

Size:-

38 Inches - Customizable to any size

Notes:-

• We will be working one round only in Back Loops and the next round only in the Front Loops.
• Keep alternating the rounds.
• Use the Straight Edge Turning Chain to make the turning chain to have a neat edge.

AD-FREE, PRINTER-FRIENDLY PDF PATTERN:

The written pattern and photo tutorial is given below along with a free video tutorial. This pattern is also available as an ad-free, printer-friendly pdf pattern that can be purchased on Ravelry. Please click the link below to purchase the PDF Pattern.

Here is the Video Tutorial:-

You can follow along with this tutorial video. Please be sure to subscribe too!

PIN it and Save for Later:-

Let's Start...!!!

Round 1:-

Start with a Magic Circle.

Chain 2(This wont be counted as a stitch)

6 Double Crochets in the Magic Circle.

Pull the yarn end to close the gap.

This will form a semi circle.

Once you reach end, Chain 2.

Straight Edge Turning Chain:-

Usually you would Chain 2, turn and start working the next round. Here is a quick tip to have a nice straight edge .

• Insert the hook into the 1st chain from the bottom.
• Yarn over and pull up a loop. You should have 2 loops on the hook.
• Turn your project and insert the hook into the Back Loop of the first stitch.(the first Double Crochet)
• Yarn over and pull up a loop. You will have 3 loops on the hook.
• Again, yarn over and pull through 2 loops. You will have 2 loops on the hook.
• Lastly, yarn over and pull through 2 loops.
• This will make one Double Crochet.

Round 2:-

(Will be Working in the Back loops only)

(1 Double Crochet is already made while making the turning chain)

1 Back Loop Double Crochet in the same stitch.(that's total 2 Double Crochets).

Repeat (2 Back Loop Double Crochets) in each of the remaining stitches.

Once you reach the end Chain 2 and turn your project - Use the Straight Turning Chain method mentioned in the previous round.

• *As mentioned in the notes, we will be alternating the Back and Front Loops with each round.
• The next round will be worked only in the Front Loops.
• Be careful to make the turning chain only in the Front Loop*

12 Stitches.

Round 3:-

(Will be Working in the Front loops only)

(1 Double Crochet is already made while making the turning chain)

1 Front Loop Double Crochet in the same stitch.(that's total 2 Double Crochets).

1 Front Loop Double Crochet in the next stitch.

Repeat (2 FLDC , 1 FLDC) .

Once you reach the end Chain 2 and turn your project - Use the Straight Turning Chain method to make the Turning Chain( into the Back Loop).

18 Stitches.

Round 4:-

(Will be Working in the Back loops only)

(1 Double Crochet is already made while making the turning chain)

1 Back Loop Double Crochet in the same stitch.(that's total 2 Double Crochets).

1 Back Loop Double Crochet each in the next 2 stitches.

Repeat (2 BLDC , 1 BLDC*2) .

Once you reach the end Chain 2 and turn your project - Use the Straight Turning Chain method to make the Turning Chain( into the Front Loop).

24 Stitches.

Round 5:-

(Will be Working in the Front loops only)

(1 Double Crochet is already made while making the turning chain)

1 Front Loop Double Crochet in the same stitch.(that's total 2 Double Crochets).

1 Front Loop Double Crochet each in the next 3 stitches.

1 Front Loop Double Crochet , 1 Back Post Double Crochet in the same stitch(that's one increase made)

Repeat (1 FLDC*3,(1FLDC, 1 BPDC)-both in the same stitch) .

Once you reach the end Chain 2 and turn your project - Use the Straight Turning Chain method to make the Turning Chain( into the Back Loop).

30 Stitches.

Round 6:-

(Will be Working in the Back loops only)

(1 Double Crochet is already made while making the turning chain)

1 Back Loop Double Crochet in the same stitch.(that's total 2 Double Crochets).

1 Back Loop Double Crochet each in the next 4 stitches.

Repeat (2BLDC ,1 BLDC*4)

Once you reach the end Chain 2 and turn your project - Use the Straight Turning Chain method to make the Turning Chain( into the Front Loop).

36 Stitches.

Round 7:-

(Will be Working in the Front loops only)

(1 Double Crochet is already made while making the turning chain)

1 Front Loop Double Crochet in the same stitch.(that's total 2 Double Crochets).

1 Front Loop Double Crochet each in the next 5 stitches.

1 Front Loop Double Crochet , 1 Back Post Double Crochet in the same stitch(that's one increase made)

Repeat (1 FLDC*5,(1FLDC, 1 BPDC)-both in the same stitch) .

Once you reach the end Chain 2 and turn your project - Use the Straight Turning Chain method to make the Turning Chain( into the Back Loop).

42 Stitches.

Round 8:-

(Will be Working in the Back loops only)

(1 Double Crochet is already made while making the turning chain)

1 Back Loop Double Crochet in the same stitch.(that's total 2 Double Crochets).

1 Back Loop Double Crochet each in the next 6 stitches.

Repeat (2BLDC ,1 BLDC*6)

Once you reach the end Chain 2 and turn your project - Use the Straight Turning Chain method to make the Turning Chain( into the Front Loop).

48 Stitches.

Round 9:-

(Will be Working in the Front loops only)

(1 Double Crochet is already made while making the turning chain)

1 Front Loop Double Crochet in the same stitch.(that's total 2 Double Crochets).

1 Front Loop Double Crochet each in the next 7 stitches.

1 Front Loop Double Crochet , 1 Back Post Double Crochet in the same stitch(that's one increase made)

Repeat (1 FLDC*7,(1FLDC, 1 BPDC)-both in the same stitch) .

Once you reach the end Chain 2 and turn your project - Use the Straight Turning Chain method to make the Turning Chain( into the Back Loop).

54 Stitches.

Round 10:-

(Will be Working in the Back loops only)

(1 Double Crochet is already made while making the turning chain)

1 Back Loop Double Crochet in the same stitch.(that's total 2 Double Crochets).

1 Back Loop Double Crochet each in the next 8 stitches.

Repeat (2BLDC ,1 BLDC*8)

Once you reach the end Chain 2 and turn your project - Use the Straight Turning Chain method to make the Turning Chain( into the Front Loop).

60 Stitches.

Round 11:-

(Will be Working in the Front loops only)

(1 Double Crochet is already made while making the turning chain)

1 Front Loop Double Crochet in the same stitch.(that's total 2 Double Crochets).

1 Front Loop Double Crochet each in the next 9 stitches.

1 Front Loop Double Crochet , 1 Back Post Double Crochet in the same stitch(that's one increase made)

Repeat (1 FLDC*9,(1FLDC, 1 BPDC)-both in the same stitch) .

Once you reach the end Chain 2 and turn your project - Use the Straight Turning Chain method to make the Turning Chain( into the Back Loop).

66 Stitches.

Round 12:-

(Will be Working in the Back loops only)

(1 Double Crochet is already made while making the turning chain)

1 Back Loop Double Crochet in the same stitch.(that's total 2 Double Crochets).

1 Back Loop Double Crochet each in the next 10 stitches.

Repeat (2BLDC ,1 BLDC*10)

Once you reach the end Chain 2 and turn your project - Use the Straight Turning Chain method to make the Turning Chain( into the Front Loop).

72 Stitches.

Round 13:-

(Will be Working in the Front loops only)

(1 Double Crochet is already made while making the turning chain)

1 Front Loop Double Crochet in the same stitch.(that's total 2 Double Crochets).

1 Front Loop Double Crochet each in the next 11 stitches.

1 Front Loop Double Crochet , 1 Back Post Double Crochet in the same stitch(that's one increase made)

Repeat (1 FLDC*11,(1FLDC, 1 BPDC)-both in the same stitch) .

Once you reach the end Chain 2 and turn your project - Use the Straight Turning Chain method to make the Turning Chain( into the Back Loop).

78 Stitches.

Round 14:-

(Will be Working in the Back loops only)

(1 Double Crochet is already made while making the turning chain)

1 Back Loop Double Crochet in the same stitch.(that's total 2 Double Crochets).

1 Back Loop Double Crochet each in the next 12 stitches.

Repeat (2BLDC ,1 BLDC*12)

Once you reach the end Chain 2 and turn your project - Use the Straight Turning Chain method to make the Turning Chain( into the Front Loop).

84 Stitches.

Round 15:-

(Will be Working in the Front loops only)

(1 Double Crochet is already made while making the turning chain)

1 Front Loop Double Crochet in the same stitch.(that's total 2 Double Crochets).

1 Front Loop Double Crochet each in the next 13 stitches.

1 Front Loop Double Crochet , 1 Back Post Double Crochet in the same stitch(that's one increase made)

Repeat (1 FLDC*13,(1FLDC, 1 BPDC)-both in the same stitch) .

Once you reach the end Chain 2 and turn your project - Use the Straight Turning Chain method to make the Turning Chain( into Both the loops).

90 Stitches.

I stopped with the increase round here.

The Rug measures 36 inches.

If you wish to make a Larger Rug, follow the below pattern:-

Round 16--(2BLDC ,1 BLDC*14)-96 Sts
Round 17--2FLDC, 1 FLDC*15,(1 FLDC*15,(1FLDC, 1 BPDC)-both in the same stitch)-102 Sts

Round 16--(2BLDC ,1 BLDC*16)-108 Sts
Round 17--2FLDC, 1 FLDC*17,(1 FLDC*17,(1FLDC, 1 BPDC)-both in the same stitch)-114 Sts

 .....and so on.

Border:-

1 Double Crochet already made while making the turning chain.

1 Double Crochet in the same stitch(that's 2 Double Crochets)

1 Picot Stitch(i.e. Chain 3 and make a Slip stitch into the Bottom stitch)

2 Double Crochets  in the same stitch.

Skip 1 Stitch.

1 Slip Stitch in the next stitch

Skip 1 Stitch.

Repeat((2DC,1 Picot,2DC)-all in the same stitch, Skip 1, 1 SL , Skip 1)

Finishing:-

To finish off with a neat edge make, 1 Single Crochet in each and every stitch .

Make the stitches on tip of each stitch.

Slip Stitch and weave off the yarn ends.

Here is the Summary of the Pattern:-

Round 1:-

Start with a Magic Circle.

Ch 2(This wont be counted as a St)

6 DCs in the Magic Circle.

Pull the yarn end to close the gap.

This will form a semi circle.

Once you reach end, Ch 2.

Straight Edge Turning Ch:-

Usually you would Ch 2, turn and start working the next round. Here is a quick tip to have a nice straight edge .

Insert the hook into the 1st Ch from the bottom.

Yarn over and pull up a loop. You should have 2 loops on the hook.

Turn your project and insert the hook into the Back Loop of the first St.(the first DC)

Yarn over and pull up a loop. You will have 3 loops on the hook.

Again, yarn over and pull through 2 loops. You will have 2 loops on the hook.

Lastly, yarn over and pull through 2 loops.

This will make one DC.

Round 2:-

(Will be Working in the Back loops only)

(1 DC is already made while making the turning Ch)

1 BLDC in the same St.(that's total 2 DCs).

Repeat (2 BLDC) in each of the remaining Sts.

Once you reach the end Ch 2 and turn your project - Use the Straight Turning Ch method mentioned in the previous round.

*As mentioned in the notes, we will be alternating the Back and Front Loops with each round.

The next round will be worked only in the Front Loops.

Be careful to make the turning Ch only in the Front Loop*

12 Sts.

Round 3:-

(Will be Working in the Front loops only)

(1 DC is already made while making the turning Ch)

1 FLDC in the same St.(that's total 2 DCs).

1 FLDC in the next St.

Repeat (2 FLDC , 1 FLDC) .

Once you reach the end Ch 2 and turn your project - Use the Straight Turning Ch method to make the Turning Ch( into the Back Loop).

18 Sts.

Round 4:-

(Will be Working in the Back loops only)

(1 DC is already made while making the turning Ch)

1 BLDC in the same St.(that's total 2 DCs).

1 BLDC each in the next 2 Sts.

Repeat (2 BLDC , 1 BLDC*2) .

Once you reach the end Ch 2 and turn your project - Use the Straight Turning Ch method to make the Turning Ch( into the Front Loop).

24 Sts.

Round 5:-

(Will be Working in the Front loops only)

(1 DC is already made while making the turning Ch)

1 FLDC in the same St.(that's total 2 DCs).

1 FLDC each in the next 3 Sts.

1 FLDC , 1 BPDC in the same St(that's one increase made)

Repeat (1 FLDC*3,(1FLDC, 1 BPDC)-both in the same St) .

Once you reach the end Ch 2 and turn your project - Use the Straight Turning Ch method to make the Turning Ch( into the Back Loop).

30 Sts.

Round 6:-

(Will be Working in the Back loops only)

(1 DC is already made while making the turning Ch)

1 BLDC in the same St.(that's total 2 DCs).

1 BLDC each in the next 4 Sts.

Repeat (2BLDC ,1 BLDC*4)

Once you reach the end Ch 2 and turn your project - Use the Straight Turning Ch method to make the Turning Ch( into the Front Loop).

36 Sts.

Round 7:-

(Will be Working in the Front loops only)

(1 DC is already made while making the turning Ch)

1 FLDC in the same St.(that's total 2 DCs).

1 FLDC each in the next 5 Sts.

1 FLDC , 1 BPDC in the same St(that's one increase made)

Repeat (1 FLDC*5,(1FLDC, 1 BPDC)-both in the same St) .

Once you reach the end Ch 2 and turn your project - Use the Straight Turning Ch method to make the Turning Ch( into the Back Loop).

42 Sts.

Round 8:-

(Will be Working in the Back loops only)

(1 DC is already made while making the turning Ch)

1 BLDC in the same St.(that's total 2 DCs).

1 BLDC each in the next 6 Sts.

Repeat (2BLDC ,1 BLDC*6)

Once you reach the end Ch 2 and turn your project - Use the Straight Turning Ch method to make the Turning Ch( into the Front Loop).

48 Sts.

Round 9:-

(Will be Working in the Front loops only)

(1 DC is already made while making the turning Ch)

1 FLDC in the same St.(that's total 2 DCs).

1 FLDC each in the next 7 Sts.

1 FLDC , 1 BPDC in the same St(that's one increase made)

Repeat (1 FLDC*7,(1FLDC, 1 BPDC)-both in the same St) .

Once you reach the end Ch 2 and turn your project - Use the Straight Turning Ch method to make the Turning Ch( into the Back Loop).

54 Sts.

Round 10:-

(Will be Working in the Back loops only)

(1 DC is already made while making the turning Ch)

1 BLDC in the same St.(that's total 2 DCs).

1 BLDC each in the next 8 Sts.

Repeat (2BLDC ,1 BLDC*8)

Once you reach the end Ch 2 and turn your project - Use the Straight Turning Ch method to make the Turning Ch( into the Front Loop).

60 Sts.

Round 11:-

(Will be Working in the Front loops only)

(1 DC is already made while making the turning Ch)

1 FLDC in the same St.(that's total 2 DCs).

1 FLDC each in the next 9 Sts.

1 FLDC , 1 BPDC in the same St(that's one increase made)

Repeat (1 FLDC*9,(1FLDC, 1 BPDC)-both in the same St) .

Once you reach the end Ch 2 and turn your project - Use the Straight Turning Ch method to make the Turning Ch( into the Back Loop).

66 Sts.

Round 12:-

(Will be Working in the Back loops only)

(1 DC is already made while making the turning Ch)

1 BLDC in the same St.(that's total 2 DCs).

1 BLDC each in the next 10 Sts.

Repeat (2BLDC ,1 BLDC*10)

Once you reach the end Ch 2 and turn your project - Use the Straight Turning Ch method to make the Turning Ch( into the Front Loop).

72 Sts.

Round 13:-

(Will be Working in the Front loops only)

(1 DC is already made while making the turning Ch)

1 FLDC in the same St.(that's total 2 DCs).

1 FLDC each in the next 11 Sts.

1 FLDC , 1 BPDC in the same St(that's one increase made)

Repeat (1 FLDC*11,(1FLDC, 1 BPDC)-both in the same St) .

Once you reach the end Ch 2 and turn your project - Use the Straight Turning Ch method to make the Turning Ch( into the Back Loop).

78 Sts.

Round 14:-

(Will be Working in the Back loops only)

(1 DC is already made while making the turning Ch)

1 BLDC in the same St.(that's total 2 DCs).

1 BLDC each in the next 12 Sts.

Repeat (2BLDC ,1 BLDC*12)

Once you reach the end Ch 2 and turn your project - Use the Straight Turning Ch method to make the Turning Ch( into the Front Loop).

84 Sts.

Round 15:-

(Will be Working in the Front loops only)

(1 DC is already made while making the turning Ch)

1 FLDC in the same St.(that's total 2 DCs).

1 FLDC each in the next 13 Sts.

1 FLDC , 1 BPDC in the same St(that's one increase made)

Repeat (1 FLDC*13,(1FLDC, 1 BPDC)-both in the same St) .

Once you reach the end Ch 2 and turn your project - Use the Straight Turning Ch method to make the Turning Ch( into Both the loops).

90 Sts.

Border:-

1 DC already made while making the turning Ch.

1 DC in the same St(that's 2 DCs)

1 Picot St(i.e. Ch 3 and make a Slip St into the Bottom St)

2 DCs  in the same St.

Skip 1 St.

1 Slip St in the next St

Skip 1 St.

Repeat((2DC,1 Picot,2DC)-all in the same St, Skip 1, 1 SL , Skip 1)

Finishing:-

To finish off with a neat edge make, 1 Single Crochet in each and every St .

Make the Sts on tip of each St.

Slip St and weave off the yarn ends.

************